Omega Pillar 2,5 Meters 3 mm

Technicial Specifications

Material : Metal

Height : 250 cm

Thickness : 3 mm

Hole Size: 10 mm

Hole Spacing : 20 mm

What is Omega Mast?

Omega Poles: “Traffic Sign Poles”, “Galvanized Traffic Poles”, “Galvanized Omega Profile Traffic Sign Poles” etc. These are the poles, which are also called by names, mounted on the traffic signboards with bolts, galvanized by hot / cold dip galvanization method, and "W", that is, "Omega" shaped when viewed from above, used within the scope of traffic and road safety.

How is Omega Pole Production Made?

Omega poles can be produced in desired length/height. But the types of poles that are used frequently: 2.5 mt omega pole, 3 mt omega pole, 3.5 mt omega pole and 4 mt omega pole can be sized. Omega pole wall thickness can also vary according to the application. In terms of wall thickness, omega pole types can be diversified as 3 mm omega pole, 4 mm omega pole and 5 mm omega pole. The meaning of omega is also important. In terms of opening, omega poles can be classified as 136 mm opening omega pole, 139 mm opening omega pole, 149 mm opening omega pole, 170 mm opening omega pole. Omega poles and traffic signs etc. The holes where the products will be mounted are 9-10 mm in diameter and 20 mm apart from their centers. In general, there are 120 holes in 4-meter omega poles, 110 holes in 3.5-meter omega poles, 90 holes in 3-meter poles, 70 holes in 2.5-meter poles, and 40 holes in 2-meter poles.

The raw sheet material used in the manufacture of omega poles must comply with the TS EN 10025 standard. Before galvanizing, the processed omega pole part surfaces should be free of burrs, clippings, protrusions, sharp ends and edges. Galvanizing after manufacturing should comply with TS EN ISO 1461, which is the hot-dip galvanizing standard. After galvanizing, no mechanical operation should be done on the omega pole. Galvanized surfaces should be smooth and smooth, free of bubbles, cracks or coating voids. Care should be taken that the holes are not blocked in the galvanized parts and that the zinc does not freeze in drops at the ends of the parts. The thickness of the galvanized coating should be at least 55 microns and the average of the whole should be at least 70 microns in the measurements made according to the TS EN ISO 2178 standard.

For What Purpose Are Omega Poles Used?

After the Omega poles are fixed to the ground, traffic signs, solar-powered LED warning signs, signaling lamps, traffic mirrors, etc. are usually placed on them. traffic and road safety products can be installed. Thanks to the mounting holes on the omega poles, more than one plate or product can be mounted on these poles.

Within the city limits, within the borders of the municipality, between the cities within the borders of highways, site-university, etc. Omega poles, which are used in campus areas, open or closed car parks and are more cost-effective than other pole solutions, are easy to install and have a long life.