High Impact Pulse Kit (3 Meter)

High Impact Road Noise Kit 3 Meter

High Impact Road Impact Set consists of 3 meters, 9 plastic bodies and 2 covers. Total length with covers is 320 cm.

High Impact Kicks; cars, trucks, bicycles etc. They are vehicle decelerating traffic equipment that can be used to slow down the speed of vehicles. It has maximum night vision thanks to its yellow and black color options and the reflectors on it. There are 4 screw holes on the plastic speed breaker bodies and 2 screw holes on their covers. It is mounted on asphalt or concrete floor with screw and dowel.

The length of each piece of High Impact Road Bump is 35 cm, the product depth is 25 cm and the height is 5 cm. In order to create a set, as many parts as necessary are ordered according to the length of the place of use. By mounting two High Impact Crash Covers at the beginning and end of each set, the durability of the set is increased and the vehicle wheels are prevented from being damaged during the transition.

Where is the High Impact Road Noise Kit Used?

On main and secondary roads

In open and closed car parks

at school crossings

Before pedestrian crossings

At Fuel Stations

In Industrial Facilities

At Airports

In Military Facilities

Speed ​​Breakers can be used safely wherever traffic is desired to be slowed down.

How to Install High Impact Road Bump?

Before ordering High Impact Kasis, take the width measurement of the road/place where you will settle. A gap of 50 cm is left on the right and left sections of the road where the bump will be mounted. Afterwards, the bump is placed on the ground and the places where the holes will be opened are marked. The ground is drilled 10-12 cm with the help of a hammer drill (with a 16-gauge drill bit). The bumps are placed on the floor and fixed with screws. Trifon screws and plastic dowels are used for the mounting of the bump. The bumps can be installed on asphalt floor, concrete floor, keystone parquet floor. The flatness of the ground, the removal of small stones and mud, and the full fit of the parts to the ground prolong the service life of the bump.

Mounting screws and dowels are shipped with the product free of charge.

Product Technical Specifications

Net Length: 3.2 meters (with covers)

Body Width: 35 cm / Cover Width: 10 cm

Body Depth: 25 cm / Cover Depth: 25 cm

Body Height: 5 cm / Cover Height: 5 cm

Body Weight: 1.32 kg / Cover Weight: 0.34 kg

Type: Plastic PPC

Reflector: Two Way 3+3 Ø 3 cm Red-White Cat Eye Reflector

Color Options: Yellow- Black

Mounting Type: 10x120 mm Trifon screw and 16 mm Plastic dowel

Number of Set Pieces: 9 Body + 2 Cover

Total Weight: 12.56 kg