Signatekma Constance Single Component Road Marking and Insulation Paint 25 Kg

Our Constance brand cold road marking paint is MMA based acrylic solvent based cold road marking paint.

This paint can be used for drawing all kinds of urban and intercity roads, parking lots and other areas, but it should not be applied on alkyd based cold road marking paint. It is a one-component road marking paint that reflects light thanks to the glass spheres applied by spraying on the surfaces and sprinkled on it. Depending on the pigment used in it, any color can be obtained. In the application of this solvent-based paint, it is applied with a spray system in the thickness of 350-800 microns. Drying occurs when the solvent in the paint evaporates.

TCK General Directorate has been formulated to meet the requirements of the highways technical specifications, TS EN 1871 and TS EN 1436 standards.

TECHNICIAL SPECIFICATIONS

Air Temperature: Between 5 ° C and 40 ° C

Maximum Humidity: 80%

Drying Time: 20 min. (air temperature 17 ° C, ground temperature 22 ° C, 49% humidity, 6 km / h wind)

Packaging: 25 Kg / Tin

Machine: Airless or Pneumatic machine, brush, roller. Thinning: Used without thinning.

Surface: Asphalt and concrete

Feature: MMA based acrylic resin component cold road line paint.

Storage: Store in a dry and well-ventilated indoor area, keep away from fire.

Cleaning: Tinex (Cellulosic thinner)

Wet Paint Consumption: 800 gr / m²

Glass Beads Application Amount: 350 gr / m²

Weight: 25.00 kg