Rubber Speed ​​Breaker Bump Set 30x33 cm (2 meters)

Rubber Speed ​​Breaker Bump Set 30x33 cm (2 Meters)

Rubber Speed ​​Breaker Bump Set 30x33 cm 2 meters consists of 6 rubber bodies and 2 rubber covers. Total length with covers is 230 cm.

Rubber Speed ​​Breaker Bump; cars, trucks, bicycles etc. They are vehicle decelerating traffic equipment that can be used to slow down the speed of vehicles. It has maximum night vision thanks to its yellow and black color options and the reflectors on it. There are 4 screw holes on the rubber speed breaker bodies and 3 screw holes on their covers. It is mounted on asphalt or concrete floor with screw and dowel.

The length of each rubber speed breaker bump part is 33 cm, the product depth is 30 cm and the height is 4 cm. In order to create a set, as many parts as necessary are ordered according to the length of the place of use. By mounting two bump caps at the beginning and end of each set, the durability of the set is increased and the vehicle wheels are prevented from being damaged during the transition.

Where is the Rubber Speed ​​Breaker Kasis Used?

• On main and secondary roads
• In open and closed parking lots
• At school crossings
• Before pedestrian crossings
• At Fuel Stations
• In Industrial Facilities
• At Airports
• In Military Facilities

Speed ​​Breakers can be used safely wherever traffic is desired to be slowed down.

How to Mount the Rubber Speed ​​Breaker Cassette?

Before ordering the Rubber Speed ​​Breaker Bump, take the width measurement of the road/place where you will settle. A gap of 50 cm is left on the right and left sections of the road where the bump will be mounted. Afterwards, the bump is placed on the ground and the places where the holes will be opened are marked. The ground is drilled 10-12 cm with the help of a hammer drill (with a 16-gauge drill bit). The bumps are placed on the floor and fixed with screws. Trifon screws and plastic dowels are used for the mounting of the bump. The bumps can be installed on asphalt floor, concrete floor, keystone parquet floor. The flatness of the ground, the removal of small stones and mud, and the full fit of the parts to the ground prolong the service life of the bump.

Mounting screws and dowels are shipped with the product free of charge.

Product Technical Specifications

Net Length: 2.3 meters (with covers)

Body Width: 33 cm / Cover Width: 15 cm

Body Depth: 30 cm / Cover Depth: 30 cm

Body Height: 4 cm / Lid Height: 4 cm

Body Weight: 3.50 kg / Cover Weight: 1.50 kg

Type: Rubber (NR SBR Rubber)

Reflector: Two Way 1+1 Yellow Reflector Tape

Color Options: Yellow- Black

Mounting Type: 10x120 mm Trifon screw and 16 mm Plastic dowel

Number of Set Pieces: 6 Body + 2 Cover

Total Weight: 24.00 kg