Overhead Signaling Pole

The overhead signaling pole is the galvanized pole to which the traffic lights are connected on signalized roads in the city and outside the city. Mostly, 200 mm pedestrian signal transmitters, 200 mm auto signal transmitters, 200 mm single signal transmitters are attached to the lower part of the pole, while 300 mm auto signal transmitters are attached to the upper part.

Poles produced with hot-dip galvanization are resistant to rust. It is manufactured using 139×5 mm, 114×4 mm, 89×4 mm cylindrical iron pipes. It is 6 meters tall. It is produced in accordance with TS 301/2, TCK standards. In order to make electrical connections on the pole, a cut is made and closed with a cover. There are 8 M16, 4 M8, 2 M6 inox bolts and 1 side cover on the overhead pole. The upper part of the overhead mast is connected with m16 bolts. For the signal transmitters connected to the upper part, an overhead auto apparatus is used.

The main purpose of overhead poles is to attract the attention of drivers from long distances and to warn them with the signal transmitter placed on the top. Therefore, 300 mm diameter signal transmitters are used due to its high visibility.

Product Code: SN-05-600

Protection: Galvanized

Pipe type: 139 x 5mm, 114 x 4mm, 89 x 4mm cylindrical iron pipe

Standard: TS 301/2, TCK Standards

Length: 6m