Pmr Fors Mma Two-Component Road Marking Paint - Yellow

Material: Matte look cold color road marking paint

Structure: Modified alkyd resin based

Density: 1,55 gr / cm3

Weight: 25.0 kg

Color: yellow

DOUBLE COMPONENT ROAD LINE PAINT

Product Description: Methyl methacrylate-based acrylic resin, high coverage, long-lasting, high-UV, two-component, cold-applied road marking paint that does not change color over time, is good to the surfaces it is applied, resistant to abrasion and friction.

Area of ​​Usage: All kinds of inner city intercity highways, pedestrian crossings, airports etc. It is used in areas, asphalt and concrete surfaces, especially pedestrian crossings, stop and speed break lines where traffic safety is important. With its 2-4 mm application film thickness, it provides good performance and strength in very heavy traffic and pedestrian circulation. It enables pedestrian and vehicle traffic flows with its fast drying after application. It creates different images with different application types such as spreading, spreading and profile skipping.

Method of Application: The surfaces to be applied should be cleaned from blistered and loose texture layers and free powders. Dust, dirt and oil on the surface should be cleaned. The application surface must be absolutely dry. Never apply on damp or wet surfaces. Double component PMR FORS MMA Double Component paint is mixed with the second component, 50% dibenzoylperoxide, with the help of drill. The paint that has entered its reaction is applied in 1 layer with a roller, steel trowel, special application apparatus and tools, without drying in a maximum of 7 minutes. Glass beads to be used for night visibility should be sprinkled homogeneously on the paint surface.

Technical specifications :

General Information

View

Matte, colorful, cold road marking paint

structure

Methyl Methacrylate based acrylic resin

Density

~ 1,95 gr / cm3

Second Component

50% dibenzoylperoxide

Second Component Mixture Ratio

4 g (for 1 kg)

Thinning Rate

Ready to Use

Color

White, Yellow and Any Color

Application Information

Application Temperature

20 ° C, 50% RH

Drying Time

30-50 Minutes (20 oC, 50% RH)

waste

2-4 kg / m2 (Paint)

Application Thickness

2-5 mm

Application Level

1 Floor

Application Tools

Roller, Steel Trowel, Special Application Tools and Apparatus

Issues to be Considered in Application:

         Before use 1. Component paint should be mixed until it becomes homogeneous in the box.

         2. The component hardener product is added at a rate of 4-5 g per 1 kg.

         The prepared and reacted mixture should be used without drying within maximum 7 minutes.

         Surface problems mayormed in environments below +5 oC and above +35 oC.

         Application surfaces should be dry and clean.           Application should be made according to the specified Application features.

It is not thinned, it is ready to use.

Application Tools Cleaning:

Application tools should be cleaned with PMR Fors Thinner immediately after uSecurity Alerts:

S2 Keep out of the reach of children.

S7 / 9 Keep container tightly closed and in a well-ventilated place.

S16 Keep away from sources of ignition. - No smoking.

Do not breathe S23 Vapor.

S24 / 25 Avoid contact with eyes and skin.

S29 Do not empty into drains.

S37 / 39 Wear suitable gloves, safety glasses / mask.

S46 If swallowed, seek medical advice immediately and show this container or label.

S51 Use only in well-ventilated areas.

Risk Warnings:

R10 Flammable.

R20 Harmful by inhalation.

R38 Irritating to skin.

R48 Danger of serious damage to health under prolonged exposure.

R65 Harmful: May cause lung damage if swallowed

R67 Vapors can cause drowsiness and dizziness.

SUITABLE FOR TS 1871